1. Introduction
3. Requirements
5. Legal notice
6. Motorola Solutions Publically Available Software
Legal Notices Document
Welcome
to the MOTOTRBO Customer Programming Software 2.0. CPS 2.0 application is the
running change software suite to the legacy CPS application. CPS 2.0 will allow
you to manage MOTOTRBO subscribers and repeaters including provisioning,
upgrading software and managing purchased licenses.
This Customer
Programming Software 2.0 is intended for programming radios to be used in the
United States of America (USA) to ensure compliance with the narrowband mandate
issued by the Federal Communications Commission (FCC). Programming
of the radio to operate on 20/25 KHz channel spacing is not permitted and has
been disabled in this application in compliance with the FCC mandate for Part
90 VHF and UHF effective January 1st, 2013.
Canadian customers and US based customers who are
not impacted by this FCC mandate for Part 90 VHF and UHF frequencies may
contact Motorola customer service for additional information on how to access
the appropriate service tool for your needs.
It is the responsibility of the
FCC licensee to comply with FCC Narrowbanding rules
and not apply these international & service tools in a manner that is
inconsistent with the Narrowbanding regulations
or the directions provided by the manufacturer.
|
Please see the Installation Guide for more information about the system requirements for CPS 2.0. |
|
|
|
Installation |
|
You need to have Administrator rights on the target PC in order to install the software.
Follow the steps below for the DVD-ROM version: · Before inserting the DVD-ROM, disable any virus scanning or firewall software, which may interfere with the installation process. · Insert the DVD-ROM containing the installation into the DVD-ROM drive. · If the installation application doesn't start within 30 seconds, the auto-run feature for DVD-ROMs for you operating system is likely disabled. Browse to your DVD-ROM and run the autorun.exe program. For example, if the E:\ drive is the DVD-ROM, run E:\autorun.exe.
Follow the steps below for the software package version: · Before starting the setup.exe program, disable any virus scanning or firewall software, which may interfere with the installation process. · Unzip the CPS 2.0 package to a directory of a local disk. · Browse to this directory and run the setup.exe program.
Note: 1.
MOTOTRBO
CPS 2.0 can co-exist with legacy MOTOTRBO CPS on the same hardware. 2.
MOTOTRBO CPS 2.0 can open legacy MOTOTRBO CPS
archive files if MOTOTRBO CPS is on the same hardware. 3.
MOTOTRBO CPS 2.0 archive files cannot be opened in legacy MOTOTRBO CPS. 4. MOTOTRBO CPS 2.0 archive files can be opened in MOTOTRBO Radio Management. |
|
Removal |
|
From the Start button on the task bar of your operating system, select Settings > Control Panel. Select the Add/Remove Programs option within the control panel. Select the MOTOTRBO CPS 2.0 item in the "Currently installed programs" box and click the remove button. |
Motorola Solutions and MOTOTRBO are registered trademarks of Motorola Solutions, Inc.
Microsoft® and Windows® are registered trademarks of Microsoft Inc.